How to extend the service life of industrial endoscopes?
Industrial endoscopes can replace the human eye to enter the space that cannot be directly observed. It is usually used to detect the defects and status of workpieces in the production process and assist production personnel in quality management.
However, it is precisely because of the particularity of industrial endoscopes that they are often faced with harsh working environments, such as high and low temperatures, water, oil, pipes of corrosive objects or the interior of components. If attention is paid to the use and maintenance of industrial endoscopes, the service life of industrial endoscopes can be effectively extended, and the inspection work can be better served.
How to extend the service life of industrial endoscopes?
1. Before use
When taking out the industrial endoscope, please take out the main unit and coil out the insertion tube at the same time, and let the pipeline slowly withdraw from the instrument case to prevent collision during the removal process. Please do not pull the insertion tube with excessive force to prevent the probe from being damaged and The lens is scratched, be careful to handle it with care.
2. In use
During the operation, gently insert the insertion tube into the device under test, adjust the brightness of the light source to a suitable illuminance, and slowly operate the joystick to control the direction of the probe to detect the operation. If the insertion tube cannot be smoothly withdrawn when the tortuous pipe is detected, be careful not to pull it hard at this time, continue to stretch the pipeline forward, and then try to slowly withdraw it by rotating it.
3. After use
After use, confirm that the probe of the industrial endoscope insertion tube is in a straight position, and then slowly pull it out, and then clean the insertion tube. The lens part can be cleaned with a soft cloth dipped in a small amount of alcohol. The lens is waterproof, so there is no need to worry at all. Destroys pixels after entering water. During the long-term use of the equipment in different environments, the components will suffer wear, and the stability, reliability, and use efficiency of the equipment will be reduced to a certain extent, and even cause the equipment to fail to operate normally. Correct use and maintenance of industrial endoscopes can extend the period of time. Industrial endoscope life.
